Huawei HCIP-Datacom-Advanced Routing & Switching Technology V1.0 : H12-831_V1.0

RealVCE ist das führende Unternehmen auf der Welt, die professionelle echte Huawei H12-831_V1.0 Prüfung Dumps, gültig H12-831_V1.0 Dumps VCE und Praxis-Test VCE fast 7 Jahre bietet. Die Erfolgsquote ist sehr hoch. Alle unsere Huawei H12-831_V1.0 Praxis-Test VCE Materialien sind die neueste echte Prüfung Dumps für Zertifizierungsprüfungen. Viele Kandidaten bestehen die Prüfungen und erhalten Zertifizierungen mit unseren Produkten. Wir sind stolz darauf, dass unsere Huawei H12-831_V1.0 Dumps VCE für Benutzer hilfreich ist und die Benutzer eine ausgezeichnete Note in dem Examen machen. 99,3% Erfolgsquote wird die meisten Benutzer helfen, die Prüfungen leicht zu besthen, wenn die Nutzer auf unserem Huawei H12-831_V1.0 Praxis-Test VCE achten.

Unser Huawei H12-831_V1.0 RealVCE hat reiche Produkte Linien: Test PDF, Test-Engine und Test online. Unsere echte Huawei H12-831_V1.0 Prüfung Dumps VCE stellt den Kunden interaktive Test-Engine zur Verfügung. Die Prüfung Umwelt und Simulationslabors simulieren mit intensiven authentischen Laborszenarien, so dass die Benutzer mit der Testumgebung wirkliches Testes vertrauen. Unser Huawei H12-831_V1.0 Test PDF mit echter Fragen-Datei ist einfach zu lesen und drucken, und auch einfach mit Audio-Prüfungen im MP3-Format zu verwendet werden. Unsere professionelle echte Huawei H12-831_V1.0 Prüfung Dumps haben alle Anforderungen des Anwenders gerecht.

RealVCE bietet nicht nur professionelle echte Huawei H12-831_V1.0 Prüfung Dumps VCE sondern auch goldene Kundendienst. Unser Kundendienst vom Update ist 365 Tage für Sie online. Sobald wir Release-Version für unsere gültige Huawei H12-831_V1.0 Dumps VCE haben, können Benutzer automatisch auf Ihren Computer herunterladen. Die und Kandidaten erhalten kostenlose Demo-Download von realen Huawei H12-831_V1.0 Prüfung Dumps. Wir bieten Download immer, irgendwann Sie unterladen wollen. Die Auswahl unserer gültigen H12-831_V1.0 Dumps VCE hilft Ihnen, die Prüfungen sicherlich zu bestehen und Erfolg machen.

Huawei HCIP-Datacom-Advanced Routing & Switching Technology V1.0 H12-831_V1.0 Prüfungsfragen mit Lösungen:

1. LSR (Label Switching Router) discovers LDP peers through the LDP discovery mechanism and establishes LDP sessions. Which of the following descriptions of LDP sessions are correct?
(Multiple choice)

A) The LSR with a larger transmission address actively initiates the establishment of a TCP link
B) LSR sends Hello message based on UDP
C) LSR discovers LDP peers by sending multicast or unicast Hello messages
D) LSR can establish a local LDP session or a remote LDP session based on the LDP discovery mechanism

2. In the OSPF network shown in the figure, the network engineer found that the Router ID configuration of R1 and R2 is the same, and both R1 and R2 have introduced the default route (default-route-advertise always). Which of the following descriptions of this scenario is wrong?

A) R1 and R2 can establish a neighbor relationship
B) R2 and R4 can establish a neighbor relationship
C) R1 and R3 can establish a neighbor relationship
D) A routing loop may occur between R3 and R4

3. In the network shown in the figure, R1, R2, R4, and R5 run IS-IS in area 49.0001. R3 and R6 run IS-IS in area 49.0002. Configure "import-route isis level-2 into level-1" on R2 and R5. Inside AS65000, R1, R3, R4, and R6 establish IBGP neighbor relationships with R2 and R5, of which R2 and R5 are RRs and R1, R4, R3, and R6 are clients. IBGP neighbor relationships are all established using the Loopback0 interface. The IP address of the Loopback0 interface of each device is 10.0.X.X/32, and the Router ID is 10.0.X.X, where X is the device number. R1 and R4 import the external network 192.168.1.0/24 into BGP, and R3 and R6 import the external network
192.168.2.0/24 into BGP.

Which of the following descriptions are correct by default? (Multiple choice)

A) There are two equal default routes in R1's routing table.
B) There are two equal default routes in R4 routing table.
C) R1 routing table has a routing entry for 192.168.2.0/24
D) The route entry for 192.168.2.0/24 in R4's routing table has two different outbound interfaces

4. In the network shown in the figure, adjacent routers use directly connected interfaces to establish EBGP neighbor relationships. The AS number is 6500X, where X is the router number. R1 and R4 both have static routes to 192.168.1.0/24, which are introduced into BGP through import. The maximum number of equal-cost routes configured for EBGP load sharing on R3 is 8.

By default, the number of equal-cost routes from R3 to 192.168.1.0/24 is which of the following?

A) 8
B) 3
C) 2
D) 1

5. In the OSPP network shown in the figure, R1 and R2 achieve Lopback0 interface interconnection through OSPF.

At the same time, R1 and R2 have enabled the MPLS LDP function, and the LDP transmission address is the IP address of the Loopback0 interface. The network engineer found that R1 and R2 could not establish an LDP session, so he first executed the command shown in the figure on R2. Based on this, which of the following reasons may cause the failure of establishing an LDP session between R1 and R2? (Multiple choice)

A) R1 GE0/0/1 interface refuses to receive ICP packets with destination port 646
B) R2 GE0/0/1 interface refuses to receive packets with source IP address 10.0.12.1
C) R2 GEO/0/1 interface refuses to receive packets with a destination IP address of 224.0.0.2
D) R1 GE0/0/1 interface refuses to receive packets with a destination IP address of 224.0.0.5

Fragen und Antworten: